Wotofo MDura Pro Kit 230W with nexMESH Pro Tank

  • $67.90
  • Ex Tax: $67.90
  • Product Code: M00000253
  • Availability: In Stock

Wotofo MDura Pro KitBrand: WotofoUnit: setType: Vape Mod KitNet Weight: 290(g)The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.INTRODUCTIONWotofo MDura Pro Kit showcased the new flagship starter kit, composed of Wotofo MDura Pro Box Mod and Wotofo nexMESH Pro Tank. The one that's beyond tough! Combining hardy d..

Available Options

Wotofo MDura Pro Kit

  • Brand: Wotofo
  • Unit: set
  • Type: Vape Mod Kit
  • Net Weight: 290(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

INTRODUCTION

Wotofo MDura Pro Kit showcased the new flagship starter kit, composed of Wotofo MDura Pro Box Mod and Wotofo nexMESH Pro Tank. The one that's beyond tough! Combining hardy designs with useful functions, the MDura Pro Kit has a box mod that is waterproof, dustproof, and shockproof. The box mod looks sturdy, but the decoration does not provide anything particularly remarkable. Metal rectangular body, stitched into rubber and decorated with traditional "mesh". There is a control panel on the front of the device, including a widescreen, three function buttons, and a USB Type-C port with a sealing plug. The size of the top 510 connector allows easy installation of an atomizer with a diameter of 30 mm. The device meets the requirements of the IP67 standard. It is fully protected to prevent the penetration of dust and water. Inside the mod, a fast nexCHIP chipset with a standard protection system and utility functions is installed. The board has a reliable protection system, a variable color interface, and a high response speed of 0.001s. The output power can reach a maximum of 230 watts. It can be operated in STANDART, POWER, and POWER + modes and under temperature control. The mod is powered by two 18650 batteries located in the bay under the hinged cover. Battery not included.

The nexMESH Pro Tank atomizer is upgraded from the nexMESH Sub Ohm Tank, maintaining its conical heating core structure and some redesigns. It is the world's 1st mesh coil & parallel dual coil tank. Wotofo nexMESH Pro is compatible with H11 Coil, H12 Coil, H13 Coil, H15 Coil. The tank can hold up to 6ml of your favorite e-liquid and uses a standard 510 connection, which means it can be paired with most vape mod devices. The sliding top filling mechanism means that the container can be refilled without disassembling, and the larger juice hole reduces the chance of spillage. The new coil is a highlight of nexMESH Pro Tank. Most importantly, the H15 double coil is immediately noticeable. It combines single mesh coils and dual parallel windings to create a unique combination specifically designed for the new tank. The H12 coil uses a Clapton mesh build for a balance of vapor and flavor. Optimized airflow control and a new drip tip provide extra comfort when atomizing.

Features

• Zinc alloy shell, with rubber coating treatment

• IP67 Water-proof, and Dust-proof

• Powered by nexCHIP, 0.001s response speed

• Powerful VW Mode paired with TCR Mode

• Dual 18650 battery, output power: 5-230W (VW Mode)/10-230W (TC Mode)

• Excellent 1.2-inch TFT color display

• Accept tanks up to 30mm in diameter

• 6mL Bubble Glass Capacity

• Top-filling design & Adjustable bottom airflow

• Compatible with H11/H12/H13/H15/H18/H19 coils

• Replaceable 810 Delrin Drip Tip

SPECIFICATION
Wotofo MDura Pro Mod
Mod Dimensions:47.4mm*88.1mm*33.1mm
Body Material:zinc alloy + rubber
Display:1.2 inch TFT screen
Battery Type:Dual 18650 battery (not included)
Resistance Range:0.10ohm-2.50ohm
VW Modes:STANDARD / POWER / POWER+
Power Range:5W-230W (VW)/ 10-230W (TC)
Temperature Range:200F - 600F/100C - 315C
TCR Value Range for Nickel:400-800 (Default value: 600)
TCR Value Range for Titanium:200-500 (Default value: 350)
TCR Value Range for SS:10-300 (Default value: 105)
Charging Port:Type-C
Charging Current:DC 5V/2A
Colors:King Kong Black, King Kong Red, King Kong Orange, King Kong Blue, Retro Red
Wotofo nexMESH Pro Tank
Diameter:24mm
Height:42.85mm (without drip tip & 510 pin)
Tank Capacity:4.5ml Straight PCTG Tube / 6ml Bubble Glass Tube
Filling Method:Top filling
Drip Tip:810 Delrin Drip Tip
Airflow Type:Adjustable bottom airflow
Atomizer Connection:510 connection
PACKAGE LIST

1 x MDura Pro Mod

1 x nexMESH Pro Tank

1 x H15 Mesh & Parallel Coil 0.15ohm(pre-installed)

1 x H12 Clapton Mesh Coil Head

1 x 6ml Bubble Glass Tube

1 x Type-C Charging Cable

1 x Accessory Bag

1 x User Manual


GUARANTEE

3 Months for Vape Mods. Vape Tanks & Accessories are DOA(Dead On Arrival), please contact us within 72 hours of delivery.

ORDERING TIPS

Attention:As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!

Write a review

Note: HTML is not translated!
    Bad           Good