Steam Crave Hadron Pro 400W TC Box Mod

  • $98.90
  • Ex Tax: $98.90
  • Product Code: M00000461
  • Availability: In Stock

Steam Crave Hadron Pro DNA 250C ModBrand: Steam CraveUnit: setType: Box ModNet Weight: 416.9(g)The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.INTRODUCTIONSteam Crave Hadron Pro Mod is fully enhanced with the famous original Hadron 220 Mod, this is Steam Crave's first DNA 4s Li-Po Mod. Combines innovation, pow..

Available Options

Steam Crave Hadron Pro DNA 250C Mod

  • Brand: Steam Crave
  • Unit: set
  • Type: Box Mod
  • Net Weight: 416.9(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

INTRODUCTION

Steam Crave Hadron Pro Mod is fully enhanced with the famous original Hadron 220 Mod, this is Steam Crave's first DNA 4s Li-Po Mod. Combines innovation, powerful technology, and top quality. Compared with many other devices, this adjustable mod is not powered by a common lithium-ion battery, but by a powerful lithium polymer battery. Hadron Pro Mod replaces the traditional lithium-ion battery but uses a more advanced Li-Po technology, which has now become a standard configuration for many mobile phones and laptops. FullyMax® 4s 1600mAh 30C Li-Po battery pack is pre-installed. Even if the peak load is 30C, the battery cannot be exhausted. FullyMax® 4s 1600mAh 30C Li-Po battery has a very low profile and a lower chance of experiencing leaking electrolyte, low internal resistance, long cycle life, and safety guarantee. It can provide you an unprecedented experience with good safety performance. Hadron Pro's extremely compact design combines simple elegance with a high degree of practicality, and thanks to the mature DNA 250C chipset provided by Evolv, its impressive range of functions can convince even ambitious users.

Hadron Pro DNA 250C Mod with Li-Po 4s battery pack is available to offer a tremendous range with a maximum wattage output of 400W to pair with nearly any available tank, aromamizer series atomizers, or rebuildable atomizer. The extended output range is widely considered the industry benchmark in Temperature Controlled output. The Hadron Pro utilizes the Evolv's DNA 250C, featuring accurate Temperature control with an industry-leading power efficiency rating, including with Boost Mode and Replay function. These technical features make Hadron Pro a real highlight, even for demanding vapers. Using the free Escribe software (which can be used to configure the Evolv DNA chip), the precise control of the device can be optimized even in the smallest details. There are three ergonomically optimized control buttons on the front panel and a 0.9" Full-Color TFT display screen that displays detailed data. The integrated USB port can also easily charge the internal replaceable Li-Po 4s battery and supports firmware upgrading. The standardized 510 connection allows the operation of almost all current atomizers on Hadron Pro Mod.

Features

• Evolv's DNA 250C Chipset

• Watts Boost, Replay Mode, Accurate Temperature Control, Preheat

• Output Mode: VW, VV, TC, TCR, Bypass

• Maximum Output 400W

• Changeable built-in Battery (Li-Po 1600mAh, 4s)

    - Long cycle life

    - Low internal resistance

    - Safety guarantee

    - Stable discharge characteristics

    - High voltage

    - Good safety performance

    - No memory effect

• USB Charging and Firmware Upgrading

    - Firmware Upgrade

    - Built-in Onboard Charger

    - Fast Charging

    - Pass-Through

    - On-The-Go USB

• Multiple Protections

    - Atomizer Protection

    - Low Resistance Protection

    - Short Circuit Protection

    - Overheat Protection

    - Low Voltage Step Down Protection

    - Onboard Reverse Polarity Protection

• 0.9" Full-Color TFT Display Screen

• Detailed configuration is possible through Escribe software

SPECIFICATION
Dimensions:59 x 36.66 x 116.1mm
Weight:416.9G
Battery:LiPO battery included (1600mah, 4s)
Input Voltage:6.0V-16.8V
Battery Voltage:12V-16.8V (3.0V-4.2V, 4s)
Output Voltage:0.2V-16.8V
Power Range:1-400W
Current Range:0.5A-30A
Max Charging Current:3A (2A suggested)
Temperature Range:200°F-600°F
Coil Material supported:Nickel, Titanium, SS460, SS316, KA1, Ni80, Ni90
Screen Pixel:0.9" (80*160 pixel) full Color TFT
Body Material:Zinc Alloy
Color available:Silver, Gunmetal, Black
PACKAGE LIST

1x Hadron Pro DNA 250C Box Mod (Evolv logo on) (equipped with 1600mAh, 4s Li-po pack)

1x USB Connecting cable

1x User Manual

GUARANTEE

3 Months for Vape Mods. Vape Tanks & Accessories are DOA(Dead On Arrival), please contact us within 72 hours of delivery.

ORDERING TIPS

Attention:As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!

Write a review

Note: HTML is not translated!
    Bad           Good