Eleaf iCare 2 Kit

• Brand: Eleaf
• Unit: set
• Type: Vape Pod Kit
  
• Net Weight: 200(g)

Combined shipping cost will be calculated automatically by the system after you choose shipping destination in the checkout step.

INTRODUCTION

Product introduction

Eleaf iCare 2 Starter Kit has a smooth, yet easy-to-grip rubberized chassis that looks somewhat like a small cell phone. Powered by a built-in 650mAh battery, it can fire up to 15W and the battery can be quickly charged thanks to the 1A maximum charging current. Maintaining a minimalistic and sleek style, the kit adopts a single firing-button that doubles as an LED battery life indicator. The button will glow in 4 colors depending on the battery level, Green for 100 to 60%, Yellow for 59 to 30%, Blue for 29 to 10%, and Red means it's time to charge up. Along the side of the device is a micro USB port that can be used to charge the device. As for the pod, it is 2ml in capacity. Eleaf has pre-installed the IC 1.3 ohm coil head that's rated for best use between 5-15W, and even includes a secondary replacement IC 1.3 ohm coil head, so you'll be ready for anything.

Parameters

E-juice Capacity: 2ML
Size: 31mm x 13mm x 86mm
Battery capacity: 650mAh
Maximum output wattage: 15W
Resistance range: 0.6-3.0ohm

Eleaf iCare 2 Kit comes with

1pc Eleaf iCare 2 Kit
1pc IC 1.3ohm Heads
1pc USB cable
1pc User Manual

SPECIFICATION

Features

1. Smooth to Touch with Exquisite Rubber Finish

2. Detachable Structure for Easy Cleaning

The iCare 2 ingeniously integrates a removable 2ml tank and an internal 650mAh battery in one tiny unit. And the tank section can be separated to be easily cleaned.

3. New IC 1.3ohm Head for Optimal Flavor

4. Easy to Use
To activate the device simply press the button and vapor will be produced instantaneously.

5. Easy-to-clean 2ml Tank with top fill Solution

To fill the tank simply remove the mouthpiece and fill it with e-liquid through the side fill hole. (Note: please do not fill into the center hole)

6. Intuitive Four Color LEDS indicating Battery Level

7. Side USB Port for Convenient Charging

Simply charge the iCare 2 through the side USB port by plugging it in to a computer or wall adapter.

How to install atomizer head?
1. Pull out the whole tank section;
2. Open the bottom cover with your fingernail in the direction of the arrow;
3. Screw the IC 1.3ohm head into the tank and put back the bottom cover to its original position.
Note: 1. Please first drip a few drops of e-liquid into the IC 1.3ohm head to fully saturate it before first use.
2. Please make sure there is nearly no e-liquid left in the tank before replacing the atomizer head.

GUARANTEE

3 Months for Battery/ Mod. Atomizer & Accessories are DOA (Dead On Arrival), please contact us within 72 hours of delivery.

ORDERING TIPS

Package

Simple paper box. Customary Packing from the factory, the packing is subject to change without notice.